go3d printing error

Are You Having any of These Problems With Your 3D Printer?

Are your 3D prints coming out looking like a mess? Is your 3D printer not behaving as it normally should? If so, then you have come to the right place.

It’s not uncommon for 3D printers to have their issues because everything does. When it comes to a project or design not printing how it should, then this can become a frustrating problem to solve.

3d printing problems

Lucky for you, you can find below some of the most common 3D printing problems that many people are faced with. Hopefully, you will find a fix for any problem you may be experiencing with your 3D printer.

Incorrect Bed Level

This is one of the most popular problems that many newcomers to 3D printing have. It is extremely important to make sure that your bed level is right and that your nozzle height is correct because if your first layer of printing goes wrong, then the whole printing project will be ruined.

You must make sure that it is not too far or too close. It is crucial to make sure the bed level is perfect and the nozzle also. It is almost guaranteed that your print will fail in the early stages or a couple of hours into it.

This mistake is most common with manual 3D printers. If you are new to 3D printing, then I suggest that you have a look at this handy tutorial.

Not Using the Correct Support Material

It is very important that you make sure you are using the correct support material when and where it is needed. Many 3D printables do not require any support material. However, there are many that do, it is important to make sure that you use the correct support material recommended for your project. This is important to the outcome of your print because you might find that your masterpiece is falling apart.

You might find out when it is too late. You need to make sure that you use the correct support material if it is required.

Applying the Wrong Slicer Settings

If you find that your 3D prints are turning out downright terrible or completely warped; this could be an indication that you are using the wrong slicer settings for your print. You may be thinking that you have the right settings and that can’t be the issue, but it can be very easy to change one number or detail.

Accidentally altering your settings, even slightly, can result in devastating effects to your 3D print. It is very important to remember that different filaments have their own optimum temperatures needed for a successful print.

Filament Has Been Tangled

Having a tangled filament is something that you definitely don’t want to have. It is important that your filament remains untangled. The best way to do this is to store your filaments away correctly and not loose or dangling as this can cause it to become tangled.

Tangled filaments can be hard to notice; especially if you have unreeled the spool and tried to reel it back together. While it may appear to not be tangled when you roll it back up, it might turn out to be and cause your printer to jam.
Sometimes, the printer won’t jam but it will ruin your project. You might not notice that your filament is tangled until hours into the printing process.

Please don’t unreel your filaments.

Ignoring Software Guidelines

If your 3D print just simply is not working out for you and you happen to be one of those people that like to disregard guidelines and instructions, then you are in for a bad time.

It is crucial to the success of your 3D print that you do not overlook the software guidelines. There are many 3D modelling software packages that you can purchase and each has its own set of guidelines. Some software offers automatic results but others may only offer manual settings.

Ignoring software guidelines almost always has a negative effect.

Not Monitoring Your Print

Not monitoring your printing process is a mistake that almost all newcomers make when it comes to 3D printing. While in most cases, it is okay to leave your printer to do its thing, it is not recommended.

It is important to keep an eye on your print just in case it begins to malfunction or prints incorrectly, this doesn’t mean that you need to be around your printer constantly; you could consider purchasing some cameras. There is nothing worse than leaving for a few hours and coming back to find that all you have as a result of your print is a pile of melted plastic.